|
Hi Chrissy. I'm assuming that you've got a version of CraftROBO that's got an "eye" so all you need to do is un-zip the file you downloaded and open the .gsd file in your software (either ROBO Master or Silhouette Studio). Make sure that the Registration Marks are set on and then send the document to your printer. The image will print out and also the marks at three corners. Take the printed sheet and put it on your cutting mat and load it into your CraftROBO. Now set it to cut. Your CraftROBO will first search for the printed registration marks so that it knows exactly where it is on the sheet. Once it knows it will cut the design out exactly where the cut line in the file indicates. Hope this helps, but any problems or if you need further information, then just post again with details of the file and where you are having issues, and there is sure to be somebody around who can help you out.
GG
__________________ 
Gwyneth George
 To have a look at my Blog click - here.
(It is updated several times a week with my latest crafted items)
Anybody who wants to be my Facebook Friend then just go to my Facebook page and send me a request.
| 
Linear Mode
